Hi All
I am having issues setting up a VPN between a CP NG FP3 HF2 firewall
running on a Nokia IP350 platfrom and a Cisco VPN concentrator 3000 series
running v 3.65R.
The issue being we are unable to succesfully setup a tunnel between the 2
devices for
IKE 3DES MD5 encryption using pre-shared secrets .
All that is displayed on the log is the initial Key exchange traffic for
Phase 1and no successs with the Phase 2 if the key exchange is initiated
from the CP end. But if the Xchange is from the Cisco end the Key exchange
is successful and we can see some ecnrypt traffic on the CP end but the
other end does not see any traffic coming in. It is the same for the
decrypt traffic coming from the Cisco to the CP . Any help is appreciated
on the issues...
Thanks
Mohan Mysore
Insure IT Services
Tel Ph: 612-97017086 Fax: 612-9701 7501
Mobile: 0409 073853
Email: mohan.mysore AT qbe DOT com
Web: www.qbe.com
________________________________________________________________________
IMPORTANT NOTICE : The information in this email is confidential and may also
be privileged. If you are not the intended recipient, any use or dissemination
of the information and any disclosure or copying of this email is unauthorised
and strictly prohibited. If you have received this email in error, please
promptly inform us by reply email or telephone. You should also delete this
email and destroy any hard copies produced.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
