Hi gurus, i had the next problem...
I'm trying to configure a VPN between NG FP1 and CISCO PIX. When the
require to create the tunnel begin, the IKE petitons arrive to the pix
with the IP of the objetc that the firewall is create, this IP address
isn't the valid ip. In laboratory the same problem appears and when i
change the ip of the object to the valid ip, all is ok, anyone knows why
this happen, and how to resolve this issue whitout change the object in
the smartdashboard...
thank's
Javier Díaz Evans
Project Engineer
Etek International Holding Corp - Colombia
ISO 9001 certified
Tel: +57 - (1) - 622 - 7122
Fax: +57 - (1) - 257 - 1520
www.etek.com.co
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
