I am attempting a fresh install of IPSO on an IP120. Problem is that
when the IP120 attempts to make an ftp connection to pull down the
ipso.tgz logs in fine then I get this error 451 Failed: Cannot build
data connection. Now the weird part, if I am logged into the IP120 and
try the same thing but switch to passive mode everything works great.
Unfortunately there is no way to switch to passive mode that I know of
when doing a reload through the boot manager. I do not have this
problem with any other Nokia model, only the IP120. Below is the output
from my ftp logs.
331 Password required for rdornhart.
Password:
230 User rdornhart logged in.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
200 Port command successful.
451 Failed: Cannot build data connection.
ftp> pass
Passive mode on.
ftp> ls
227 Entering Passive Mode (203,193,63,25,187,122).
150 Data connection accepted from 203.193.63.26:1301; transfer starting.
-rw-r--r-- 1 ftp ftp 32922575 Apr 14 15:56 ipso.tgz
226 Transfer ok
ftp>
(000002) 6/17/2003 2:58:48 PM - (not logged in) (203.193.63.26) >
connected to ip : 203.193.63.25
(000002) 6/17/2003 2:58:48 PM - (not logged in) (203.193.63.26) >
sending welcome message.
(000002) 6/17/2003 2:58:48 PM - (not logged in) (203.193.63.26) > 220
Dorny
(000002) 6/17/2003 2:58:51 PM - (not logged in) (203.193.63.26) > USER
rdornhart
(000002) 6/17/2003 2:58:51 PM - (not logged in) (203.193.63.26) > 331
Password required for rdornhart.
(000002) 6/17/2003 2:58:54 PM - (not logged in) (203.193.63.26) > PASS
********
(000002) 6/17/2003 2:58:54 PM - rdornhart (203.193.63.26) > logged in.
(000002) 6/17/2003 2:58:54 PM - rdornhart (203.193.63.26) > 230 User
rdornhart logged in.
(000002) 6/17/2003 2:58:54 PM - rdornhart (203.193.63.26) > SYST
(000002) 6/17/2003 2:58:54 PM - rdornhart (203.193.63.26) > 215 UNIX
Type: L8
(000002) 6/17/2003 2:58:57 PM - rdornhart (203.193.63.26) > PORT
203,193,63,26,5,20
(000002) 6/17/2003 2:58:57 PM - rdornhart (203.193.63.26) > 200 Port
command successful.
(000002) 6/17/2003 2:58:57 PM - rdornhart (203.193.63.26) > LIST
(000002) 6/17/2003 2:58:57 PM - rdornhart (203.193.63.26) > 451 Failed:
Cannot build data connection.
(000002) 6/17/2003 2:59:08 PM - rdornhart (203.193.63.26) > PASV
(000002) 6/17/2003 2:59:08 PM - rdornhart (203.193.63.26) > 227 Entering
Passive Mode (203,193,63,25,187,122).
(000002) 6/17/2003 2:59:08 PM - rdornhart (203.193.63.26) > LIST
(000002) 6/17/2003 2:59:08 PM - rdornhart (203.193.63.26) > 150 Data
connection accepted from 203.193.63.26:1301; transfer starting.
(000002) 6/17/2003 2:59:08 PM - rdornhart (203.193.63.26) > 226 Transfer
ok
Thanks
Richard Dornhart
richard_dornhart AT data3.com DOT au
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
