Telnet in and run CPCONFIG, then add a GUI client. Once that is done,
you should be able to connect via GUI (on the interface that still
works). Once you connect, then you can edit the firewall object, go to
interfaces tab and get the interfaces again.
-----Original Message-----
From: Mailing list for discussion of Firewall-1
[mailto:FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM] On Behalf Of Graham,
Chad
Sent: Monday, April 26, 2004 10:45 AM
To: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
Subject: [FW-1] Management Server
All,
I was trying to fix a problem we were having on one of our firewalls and
caused myself
a bigger problem. On the firewall topology tab I removed all but the
hme0 interface (which
the license is bound to) and installed the policy. Well as luck would
have it, we used a
different interface to connect to the SmatCenter Server and now I cannot
get it back. I
still have telnet access to the machine so I edited the objects.C file
and added the other
nic back in, still no luck. I tried SIC reset, still nothing. Always the
same error "Connection
cannot be initiated. Make sure the server is up and running". This is
running on a Solaris
machine, and we do not have the GUI license for this machine so I cannot
run the GUI on
localhost. Is there anything I can do via the command line to allow me
to connect to
the firewall via the SmartDashboard GUI?
Thanks in advance,
Chad Graham
Email: chad.graham AT cdi-es DOT com <mailto:chad.graham AT cdi-es DOT com>
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
