Under command line of the gateway, type "fw unloadlocal", then try to
reconnect from the management.
-----Original Message-----
From: Graham, Chad [mailto:chad.graham AT CDI-ES DOT COM]
Sent: Monday, April 26, 2004 10:45 AM
To: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
Subject: [FW-1] Management Server
All,
I was trying to fix a problem we were having on one of our firewalls and
caused myself
a bigger problem. On the firewall topology tab I removed all but the
hme0 interface (which
the license is bound to) and installed the policy. Well as luck would
have it, we used a
different interface to connect to the SmatCenter Server and now I cannot
get it back. I
still have telnet access to the machine so I edited the objects.C file
and added the other
nic back in, still no luck. I tried SIC reset, still nothing. Always the
same error "Connection
cannot be initiated. Make sure the server is up and running". This is
running on a Solaris
machine, and we do not have the GUI license for this machine so I cannot
run the GUI on
localhost. Is there anything I can do via the command line to allow me
to connect to
the firewall via the SmartDashboard GUI?
Thanks in advance,
Chad Graham
Email: chad.graham AT cdi-es DOT com <mailto:chad.graham AT cdi-es DOT com>
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
