Do you have a rule on the desktop policy allowing the local connections to
connect to the SecureClient? I would check the SecureClient Diagnostics log to
see if it is dropping the back connection.
Hope this helps,
Chris
-----Original Message-----
From: Mailing list for discussion of Firewall-1 [mailto:FW-1-MAILINGLIST AT
AMADEUS.US.CHECKPOINT DOT COM] On Behalf Of José María Gabaldón
Sent: Thursday, July 22, 2004 7:13 AM
To: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
Subject: [FW-1] Netmeeting through SecureClient
Hi guys,
I have a Check Point R55 firewall with SecureClient R56 configured in Office
Mode. VPN works fine, the client gets its IP from the gateway, from the central
site we can ping the client...
However, we have a VoIP (H.323) gateway in the encryption domain, we are trying
to make calls from Netmeeting (in the remote client) to the VoIP gateway, the
call establishes, but the voice is only heard in one direction (from the client
to the gateway only).
Some configuration pointers:
- Remote access rule has "Any" services configured
- SmartView tracker doesn't show any dropped packets
- I have a manual NAT rule disableing the NAT hide inside the VPN.
- We have tested this enviroment with other IPSec clients and other firewalls
and have worked fine.
Do you have any idea of that could be happening?
Thanks in advanced,
Regards,
_______________________________
José María Gabaldón
Network Security Engineer
email: jgabaldon AT cybertech.com DOT ve
www.cybertech.com.ve
=================================================
To set vacation, Out-Of-Office, or away messages, send an email to LISTSERV AT
amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
