Hi All,
We are using checkpoint NG FP2. We configured checkpoint gateway so
that the SecureClient can have remote access to the internal networks. The
servers in the internal networks can reach (pings work) the secure clients but
the secure clients cannot reach the internal network or any servers (pings or
http access to any servers did not work). In the network properties for
internal network i checked "Add Automatic Address Translation rule" and picked
"Hide" as the translation method (Hide behind the interface of the install on
Gateway). First of all do i need to configure NAT inorder for my network to
work correctly. If so is my NAT rules incorrect. Please advice.
Our network looks like this
Client CheckpointGateway
Server
10.10.20.60/20 External Internal
10.10.58.200/20
10.10.16.40 10.10.58.190
The Ip pool that i assigned is network 10.9.62.0/24. The secureclient got an ip
address 10.9.62.1 when it connected to the gateway. The server can ping the
client but the client cannot ping the gateway. Also in the log i do not see any
packets being dropped.
Any help is greatly appreciated, my boss is sitting on top of me so i had look
for help quickly.
-thanks,
sam
---------------------------------
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
