It actually exported fine, the messages that you are seeing are just
debug messages, if you look at the bottom it will tell you that the
export completed succesfully.
On Thu, 28 Oct 2004 13:16:34 +0200, שאול בן שושן
<shaulbe AT education.gov DOT il> wrote:
> Hi all,
>
> We have a one cp r55 splat, we have license for AH and more 1 enforcement.
>
> From what I read we need to install new management and 2 new enforcement.
>
> i try to export the object and the rules with upgrade Export and I have
> error:
>
> [Expert@iptable]# /usr/src/upgrade_export -d 2.tgz
>
> You are required to close all Check Point clients before the Export
> operation begins.
> If the export fails, stop Check Point services and run the upgrade_export
> command again.
> Press ENTER when ready..
>
> [ 9706 1024]@iptable[25 Oct 9:51:54] GetExecPath: Exec dir = /usr/src
> [ 9706 1024]@iptable[25 Oct 9:51:54] AppendPathEnvVar:
> PATH=/opt/CPppak-R55/bin:/opt/CPfw1-R55/bin:/opt/CPinfo-R55/bin:/opt/CPppak-
> R55/bin:/opt/CPfw1-R55/bin:/opt/CPinfo-R55/bin:/opt/CPshrd-R55/util:/opt/CPs
> hrd-R55/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/us
> r/X11R6/bin:/home/tp105/bin:/usr/src
> Checking the existence of necessary files...
> Copying files to temp dir...
> [ 9706 1024]@iptable[25 Oct 9:51:54] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:54] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:54] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:54] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:54] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:54] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:54] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:55] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:55] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:55] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:55] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:55] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:55] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:55] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:55] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:55] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:55] ExecuteCommandLineAndCaptureStdout:
> Error >> Failed to execute cpprod_util CPPROD_GetValue Products uag 1 >
> /opt/CPfw1-R55/tmp/ver.tmp 2>&1
> [ 9706 1024]@iptable[25 Oct 9:51:55] RunCpprodUtilCmd:
> ExecuteCommandLineAndCaptureStdout failed (trying to run cpprod_util
> CPPROD_GetValue Products uag 1)
> [ 9706 1024]@iptable[25 Oct 9:51:55] IsUAGInstalled: Failed to run
> 'cpprod_util' command.
> [ 9706 1024]@iptable[25 Oct 9:51:55] CopyUAGFiles: UAG is not installed. No
> need to copy its files.
> [ 9706 1024]@iptable[25 Oct 9:51:55] IsManagementEnhancement: Warning >>
> SmartView Reporter Add-On is not installed.
> [ 9706 1024]@iptable[25 Oct 9:51:55] CopySVRFiles: SmartView Reporter is
> not installed. No need to copy its files.
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> [ 9706 1024]@iptable[25 Oct 9:51:58] do_links_getver: strncmp failed.
> Returning -2
> Building configuration file...
> Compressing the files...
> [ 9706 1024]@iptable[25 Oct 9:52:00] ExecuteCommand: Succeeded to execute
> 'gtar -c -C "/opt/CPfw1-R55/tmp/upgrade_temp_dir" -f "2.tgz.tar" .' command
> [ 9706 1024]@iptable[25 Oct 9:52:02] ExecuteCommand: Succeeded to execute
> 'gzip 2.tgz.tar' command
>
> The export operation finished successfully.
>
> Note: /home/tp105/2.tgz contains your Security configuration, it is highly
> recommended to delete it after completing the process.
>
> Any help?
>
> shaul
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to LISTSERV AT amadeus.us.checkpoint DOT com
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> fw-1-owner AT ts.checkpoint DOT com
> =================================================
>
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
