Pat,
Did you setup the Cingular Connection Manager for use with the VPN-1
client? It's supposed to be compatible with Check Point. I read that
you have to launch SecureClient from the Connection Manager's VPN
button after configuring it. I'm not sure if that is a requirement or
just a convenience.
I've recently been researching this purchase for myself. I may hold
off now that I saw your post. I know that some providers require an
additional VPN fee. Is Cingular blocking ESP packets and require an
additional service charge to use corporate VPNs?
BTW: VPN client issues notwithstanding, what speeds are you getting
for Internet surfing? From what part of the globe? Is the connection
reliable?
Thanks,
-fwguru
On 4/18/05, Pat Kelly <pkelly AT bpu DOT com> wrote:
> I am looking for anyone on this list with experience with Cingular/ATT
> wireless with the GC83 SonyEricsson wireless card. I am using R56 of
> SecureClient with 4.2.11 Cingular Connection Manager for the wireless
> connection. I have loaded and configured the software to the point of being
> able to authenticate to the VPN when connected via the wireless card. I am
> using the Public Network on the Cingular/ATT network. I can see the
> successful login on the Checkpoint VPN log. However when I try to connect
> to something behind the firewall, I cannot see any attempt on the firewall
> of the client trying to access any computers on the private corporate
> network. When I use this same SecureClient configuration on the same laptop
> without the GC83 card, everything works just fine. I have tried to add a
> route : route add a.b.c.d MASK my.sub.net.0 PUB.IP.OF.FW, the route cannot
> be configured because the gateway is not on the same network, which tells me
> that the Cingular card is not allowing the alteration of the routing table
> necessary for the VPN to work. Any ideas?
>
> Thanks in advance for you time,
>
> Patrick Kelly
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to LISTSERV AT amadeus.us.checkpoint DOT com
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> fw-1-owner AT ts.checkpoint DOT com
> =================================================
>
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
