Mehmet,
It's a modem, it does bridge the DSL connection based on RFC 1483. A windows XP
system connects fine using PPPoE, the Edge doesn't...
The modem is a Prestige 650M-37, sold by deutsche Telekom as a Teledat 331
LAN. Any idea's what's wrong?
Name: P650M
Routing: BRIDGE
ZyNOS F/W Version: V3.40(IM.4)_4.10.118 | 5/21/2003
ADSL Chipset Vendor: Alcatel, Version 4.10.118
Standard: Multi-Mode
Dion
> -----Oorspronkelijk bericht-----
> Van: Mailing list for discussion of Firewall-1
> [mailto:FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM]Namens Mehmet
> Buyukozer
> Verzonden: zaterdag 28 mei 2005 21:41
> Aan: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
> Onderwerp: Re: [FW-1] VPN-1 Edge PPPoE not working????
>
>
> Hi Dion
>
> Did you set up your modem as to work in bridge mode? I saw some issues
> related to adsl modems when working with vpn edge, maybe you
> should first
> talk with dsl modem's provider. Most of the time, these cases
> were related
> to adsl modems. Some of the modes were not correctly
> implemented in dsl
> modems as the standart says so this kind of problems occurs.
>
> I copied some notes from vpn edge's manual troubleshooting
> part to below.
>
> Hope this helps.
>
> Mehmet
>
> I cannot access my DSL broadband connection. What should I do?
> DSL equipment comes in two flavors: bridges (commonly known as DSL
> modems) and routers. Some DSL equipment can be configured to work both
> ways.
> . If you connect to your ISP using a PPPoE or PPTP dialer defined in
> your operating system, your equipment is most likely configured as
> a DSL bridge. Configure a PPPoE or PPTP type DSL connection.
> . If you were not instructed to configure a dialer in your operating
> system, your equipment is most likely configured as a DSL router.
> Configure a LAN connection, even if you are using a DSL
> connection.
>
>
>
> -----Original Message-----
> From: Mailing list for discussion of Firewall-1
> [mailto:FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM] On Behalf
> Of Dion-ben
> Hendriks
> Sent: Saturday, May 28, 2005 11:24 AM
> To: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
> Subject: [FW-1] VPN-1 Edge PPPoE not working????
>
> Hi
>
> Up untill now I have a VPN-1 Edge X 16 working behind a
> Thomson (Alcatel)
> Speedtouch 570i DSL router, where the Thomson logs-in to the
> DSL en does
> NAT. This works OK but I want to remove te NAT in front of
> the Edge 1 as a
> want to experiment with Site-to-Site VPN's. So now I've got a
> basic DSL
> modem, T-Com's Teledat 331 LAN (Zyxel Prestige 650M), but I
> can't set up a
> PPPoE connection a required by my DSL provider, the Edge 1
> keeps saying it's
> establisching the connection......but doesn't connect. The logs aren't
> helpfull at all...there no info in there....
> The modem works fine when I use a Windows XP system to
> connect with PPPoE.
> I've tried firmwares 5.0.50 and 5.0.73 neither worked...
> What am I doing wrong, PPPoE configuration is pretty simple,
> right, just
> enter username and password and go.....or no go in my
> case....what could be
> the problem here?
>
> Dion
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to LISTSERV AT amadeus.us.checkpoint DOT com
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> fw-1-owner AT ts.checkpoint DOT com
> =================================================
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to LISTSERV AT amadeus.us.checkpoint DOT com
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> fw-1-owner AT ts.checkpoint DOT com
> =================================================
>
>
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
