Hi,
I sniffed out what happend with Etherreal, I found out what the problem
was....the VPN-1 Edge uses only the first 14 characters of the password field
with PPPoE.....and my password (given to me by my provider) was ...15
characters long.......
Changed the password and it works fine now.....
Dion
-----Oorspronkelijk bericht-----
Van: Mailing list for discussion of Firewall-1
[mailto:FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM]Namens Hendriks,
Dion-ben
Verzonden: maandag 30 mei 2005 8:46
Aan: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
Onderwerp: Re: [FW-1] VPN-1 Edge PPPoE not working????
Mehmet,
It's a modem, it does bridge the DSL connection based on RFC 1483. A windows XP
system connects fine using PPPoE, the Edge doesn't...
The modem is a Prestige 650M-37, sold by deutsche Telekom as a Teledat 331
LAN. Any idea's what's wrong?
Name: P650M
Routing: BRIDGE
ZyNOS F/W Version: V3.40(IM.4)_4.10.118 | 5/21/2003
ADSL Chipset Vendor: Alcatel, Version 4.10.118
Standard: Multi-Mode
Dion
> -----Oorspronkelijk bericht-----
> Van: Mailing list for discussion of Firewall-1
> [mailto:FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM]Namens Mehmet
> Buyukozer
> Verzonden: zaterdag 28 mei 2005 21:41
> Aan: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
> Onderwerp: Re: [FW-1] VPN-1 Edge PPPoE not working????
>
>
> Hi Dion
>
> Did you set up your modem as to work in bridge mode? I saw some issues
> related to adsl modems when working with vpn edge, maybe you
> should first
> talk with dsl modem's provider. Most of the time, these cases
> were related
> to adsl modems. Some of the modes were not correctly
> implemented in dsl
> modems as the standart says so this kind of problems occurs.
>
> I copied some notes from vpn edge's manual troubleshooting
> part to below.
>
> Hope this helps.
>
> Mehmet
>
> I cannot access my DSL broadband connection. What should I do?
> DSL equipment comes in two flavors: bridges (commonly known as DSL
> modems) and routers. Some DSL equipment can be configured to work both
> ways.
> . If you connect to your ISP using a PPPoE or PPTP dialer defined in
> your operating system, your equipment is most likely configured as
> a DSL bridge. Configure a PPPoE or PPTP type DSL connection.
> . If you were not instructed to configure a dialer in your operating
> system, your equipment is most likely configured as a DSL router.
> Configure a LAN connection, even if you are using a DSL
> connection.
>
>
>
> -----Original Message-----
> From: Mailing list for discussion of Firewall-1
> [mailto:FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM] On Behalf
> Of Dion-ben
> Hendriks
> Sent: Saturday, May 28, 2005 11:24 AM
> To: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
> Subject: [FW-1] VPN-1 Edge PPPoE not working????
>
> Hi
>
> Up untill now I have a VPN-1 Edge X 16 working behind a
> Thomson (Alcatel)
> Speedtouch 570i DSL router, where the Thomson logs-in to the
> DSL en does
> NAT. This works OK but I want to remove te NAT in front of
> the Edge 1 as a
> want to experiment with Site-to-Site VPN's. So now I've got a
> basic DSL
> modem, T-Com's Teledat 331 LAN (Zyxel Prestige 650M), but I
> can't set up a
> PPPoE connection a required by my DSL provider, the Edge 1
> keeps saying it's
> establisching the connection......but doesn't connect. The logs aren't
> helpfull at all...there no info in there....
> The modem works fine when I use a Windows XP system to
> connect with PPPoE.
> I've tried firmwares 5.0.50 and 5.0.73 neither worked...
> What am I doing wrong, PPPoE configuration is pretty simple,
> right, just
> enter username and password and go.....or no go in my
> case....what could be
> the problem here?
>
> Dion
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to LISTSERV AT amadeus.us.checkpoint DOT com
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> fw-1-owner AT ts.checkpoint DOT com
> =================================================
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to LISTSERV AT amadeus.us.checkpoint DOT com
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> fw-1-owner AT ts.checkpoint DOT com
> =================================================
>
>
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
