Hi,
I received a HP DL 320 G3 (with SATA Controller and one disk), and I can
install NG AI R55 HFA_12 on it :
it starts booting on the CDROM and I see "Loading" and making "Loading
ramdisk" then machine seems to freeze (Verr Num, Caps Lock, Scroll Lock
doesn't want to change).
I try to change many parameters from Bios without success.
CDROM "SecurePlatform NG with AI (R55) Hardware Compatibility Testing Tool"
make the same thing.
I also try to boot on NGX CDROM (an old one, before HFA_01 for NGX) and it
works. But ... (there is a 'but') it doesn't detect the onboard "Intel
6300ESB/82801FR SATA Controller" because it says there is no disk to install
OS. The two network devices are approximatively well because there were
detected, but the NIC 1 (eth0 detected) are still showed "down" even if it's
well negociated on the switch (and the LED show good). Hope, it is only a
driver problem and not a hardware one (I think I will try to install
Windows, to test this Network Interface).
Conclusion: as the NGX Media boots up, I think I will wait for NG AI R55
HFA_16 Media CDROM to test it again.
Note: Intel 6300ESB and Intel 82801FR SATA Controller are recommended by
Checkpoint for NG AI R55 :
http://www.checkpoint.com/products/supported_platforms/recommended/ng/index.html
even from 17-Aug-2005.
Hope it will helps you.
--
Fabrice Barutel
Date: Thu, 24 Nov 2005 21:32:03 -0500
From: RoNNY <ronnynussbaum AT GMAIL DOT COM>
Subject: Re: Firewall Freezes
Happened to me.
Loading R55 from a CD that had R55 with HFA12 built in solved it.
I assume that when you wrote that you loaded SPLAT on these server before,
it was a different version, or something else was different on them.
-RoNNY
On 11/24/05, Satyam Mathura <satz.sm AT gmail DOT com> wrote:
>
> Hey Guys:
> We're getting a really weird error when installing SecurePlatform on =
a
> pair of HP ML350 G4 servers. The install goes through successfully on eac=
h
> server, with the Hardware Compatability Screen indicating that the
> hardware
> is suitable for the installation. However, after the initial reboot and
> the
> R55 installation is selected, it fails to load and the machines freeze.
> The
> customary loading screen "....." is not seen. This problem occurs on bot=
h
> servers. The funny thing is that approx 3 wks ago we tested Splat on thes=
e
> same exact servers, using the same build of Splat (build 125) that we are
> using now and it worked fine. These HP servers are also on CheckPoint's
> recommended hardware list. When Debug Mode is selected, errors are
> displayed
> rapidly on the screen and cannot be read.
> Has anyone ever come accross a problem like this before? Please help.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
