Hi Adam,
I am copying the output of the debugger below. I am not sure if the
debugger ran properly as I seem some error like message, no debugging
symbols found. I have copied the whole capture here. Let me know if
you could decipher any information from this. Thanks for your help.
# gdb /cdrom/solaris2/license_upgrade
/var/core/core_license_upgrade_0_0_44554
GNU gdb 6.0
Copyright 2003 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "sparc-sun-solaris2.9"...
(no debugging symbols found)...
Core was generated by `./license_upgrade'.
Program terminated with signal 10, Bus error.
Reading symbols from /usr/lib/libthread.so.1...(no debugging symbols
found)...
done.
Loaded symbols for /usr/lib/libthread.so.1
Reading symbols from /usr/lib/librt.so.1...(no debugging symbols
found)...done.
Loaded symbols for /usr/lib/librt.so.1
Reading symbols from /usr/lib/libresolv.so.2...(no debugging symbols
found)...
done.
Loaded symbols for /usr/lib/libresolv.so.2
Reading symbols from /usr/lib/libsocket.so.1...(no debugging symbols
found)...
done.
Loaded symbols for /usr/lib/libsocket.so.1
Reading symbols from /usr/lib/libnsl.so.1...(no debugging symbols found)...
done.
Loaded symbols for /usr/lib/libnsl.so.1
Reading symbols from /usr/lib/libdl.so.1...(no debugging symbols
found)...done.
Loaded symbols for /usr/lib/libdl.so.1
Reading symbols from /usr/lib/libintl.so.1...
warning: Lowest section in /usr/lib/libintl.so.1 is .hash at 00000074
(no debugging symbols found)...
done.
Loaded symbols for /usr/lib/libintl.so.1
Reading symbols from /usr/lib/libm.so.1...(no debugging symbols
found)...done.
Loaded symbols for /usr/lib/libm.so.1
---Type <return> to continue, or q <return> to quit---
Reading symbols from /usr/lib/libc.so.1...(no debugging symbols
found)...done.
Loaded symbols for /usr/lib/libc.so.1
Reading symbols from /usr/lib/libw.so.1...
warning: Lowest section in /usr/lib/libw.so.1 is .hash at 00000074
(no debugging symbols found)...done.
Loaded symbols for /usr/lib/libw.so.1
Reading symbols from /usr/lib/libkstat.so.1...(no debugging symbols
found)...
done.
Loaded symbols for /usr/lib/libkstat.so.1
Reading symbols from /usr/lib/libkvm.so.1...(no debugging symbols found)...
done.
Loaded symbols for /usr/lib/libkvm.so.1
Reading symbols from /usr/lib/libelf.so.1...(no debugging symbols found)...
done.
Loaded symbols for /usr/lib/libelf.so.1
Reading symbols from /usr/lib/libCrun.so.1...(no debugging symbols found)...
done.
Loaded symbols for /usr/lib/libCrun.so.1
Reading symbols from /usr/lib/libaio.so.1...(no debugging symbols found)...
done.
Loaded symbols for /usr/lib/libaio.so.1
Reading symbols from /usr/lib/libmd5.so.1...(no debugging symbols found)...
done.
Loaded symbols for /usr/lib/libmd5.so.1
Reading symbols from /usr/lib/libmp.so.2...(no debugging symbols
found)...done.
Loaded symbols for /usr/lib/libmp.so.2
Reading symbols from /usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1...
(no debugging symbols found)...done.
Loaded symbols for /usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1
#0 0x000cfd5c in do_test ()
(gdb) where
#0 0x000cfd5c in do_test ()
#1 0x63656e7b in ?? ()
Cannot access memory at address 0x74204ca5
(gdb)
Thanks,
Ramakrishnan
Adam BE wrote:
Hi Ramki,
1. I suggest you get the stack from the core file and post it here.
It might help in pinpointing what has caused the problem.
The general syntax for getting the stack from a core file is:
<debugger> <path_to_executable> corefile
Examples: gdb `which license_upgrade` core.license_upgrade.1721 (linux)
dbx `which license_upgrade` core.license_upgrade.1721
(solaris)
Once the debugger has finished loading type: where
This should output the stack.
2. Could you be more specific as to the exact steps which caused the problem?
If I recall correctly there are several ways you could perform license upgrade
(online before software update, offline before software update etc')... which
commands did you type and in which exact order that causes this problem to
reproduce?
Thanks,
Adam.
Ramki Security <ramki.security AT GMAIL DOT COM> wrote: Thanks for your comments. I forgot to mention that I had already done
the upgrade of all the NG licenses to NGX as recommended by the upgrade
guide. When I did the license upgrade first time it went on fine and
did the upgrade. When I run the NGX install and selected upgrade after
the license upgrade is done, it core dumped at the point where license
upgrade status is being checked.
Thanks,
Ramki
Bhavin Gandhi wrote:
U can try the upgrade seperately. Download the license from Usercenter & attach
the same using Checkpoint configuration.
Regds,
bG
-----Original Message-----
From: Mailing list for discussion of Firewall-1 [mailto:FW-1-MAILINGLIST AT
AMADEUS.US.CHECKPOINT DOT COM] On Behalf Of Ramki Security
Sent: Wednesday, March 22, 2006 8:45 PM
To: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
Subject: Re: [FW-1] NGX Upgrade issue
Hi,
I am trying a smartcenter upgrade with no firewall. Running HFA17.
Failing process is license_upgrade. I tried running the license_upgrade
separately with same results (core dump).
Thanks,
Ramakrishnan
Adam BE wrote:
Hi Ramki,
Is it an upgrade of SmartCenter or firewall?
Which HFA does your R55 have (latest vesion is recommended) ?
Which process fails with a core dump?
I suggest you also get the stack from the core dump and post it here.
Thanks,
Adam.
Ramki Security wrote: Hi all,
We were trying to upgrade from NG R55 to NGX. The upgrade is failing
with segment fault (core dumped) on solaris 9 box. This happens when
the license upgrade status is checked. When I run the license upgrade
utility manually (separately) also this problem comes. Have any of you
faced a smilar situation. Any ideas will be helpful.
Thanks,
Ramki
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for
2�/min or less.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s) and may
contain proprietary, confidential or privileged information. If you are not the
intended recipient, you should not disseminate, distribute or copy this e-mail.
Please notify the sender immediately and destroy all copies of this message and
any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should
check this email and any attachments for the presence of viruses. The company
accepts no liability for any damage caused by any virus transmitted by this
email.
www.wipro.com
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
---------------------------------
New Yahoo! Messenger with Voice. Call regular phones from your PC for low, low
rates.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
