Have you tried a 6.0.x firmware? 6.0.53 is the latest one released for the
Edge.
> -----Original Message-----
> From: Mailing list for discussion of Firewall-1
> [mailto:FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM] On Behalf
> Of Michael Schwartzkopff
> Sent: Wednesday, March 29, 2006 3:35 AM
> To: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
> Subject: [FW-1] HA with EDGE, Problems with connectivity
>
> Hi all,
>
> I configured two EDGE boxes exactly like in the manuals for
> HA. Two dedicated
> IP addresses + one virtual inside, one IP on the outside. On
> the passive box
> I enabled "do not connect to internet when in passive mode".
>
> Ping runs good and if I pull the internet plug of the active
> box I see the
> failover in the logs and the ping goes on.
>
> If I try the same with a long download disconnecting the
> internet from the
> active box it breaks the download. I also see according drops
> in the logfile
> of the standby (now active) box.
>
> It seems that the state tables are not synchronized on the boxes.
>
> Sync is configured via DMZ interfaces on both machines (two
> dedicated IPs and
> one virtual again).
>
> Any idea what went wrong? Thank for any hints.
>
> Firmaware version: 5.0.94
>
> Michael.
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to LISTSERV AT amadeus.us.checkpoint DOT com
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> fw-1-owner AT ts.checkpoint DOT com
> =================================================
>
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
