Have you tried the facilities in the client OS for port forwarding?
If it's windows (I guess it has be be for the GUI to run)
netsh interface portproxy add v4tov4 listenport=18190
connectaddress=(yourciscorouter) connectport=(somerandomport) protocol=tcp
Then you could connect to 18190 on 127.0.0.1, the connection would be forwarded
to the random port on the cisco router, and then on to 18190 on the
smartconsole.
Yes, it's quite ugly, but your configuration sounds somewhat kludgy to start
with. Anyway, I hope this helps
Regards
Mark
-----Original Message-----
From: Mailing list for discussion of Firewall-1 [mailto:FW-1-MAILINGLIST AT
AMADEUS.US.CHECKPOINT DOT COM] On Behalf Of cisco4ng
Sent: 26 May, 2006 06:59
To: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
Subject: [FW-1] Urgent help: Changing SmartDashboard from using tcp port 18190
to something else
Hi Guys,
Is it possible to change the TCP port of the GUI in the Provider-1 MDG or
SmartDashboard and Tracker to use other tcp port instead of the default
tcp 18190 port (CPMI)? Is there something in the registry setting in windows
that the GUI run on that I can do to make it happen?
The reason I want to do it is my Provider-1 sit behind a Cisco router and
I am doing redirect on the router to get to my Provider-1 via MDG. The
MDG works fine but I can not redirect the same port twice on the Cisco router
or Cisco Pix for that matter. With Windows Remote desktop I can redirect
port 3390 to tcp 3389 by typing the command 129.174.1.13:3390.
Is it possible with either MDG or SmartDashboard. Thanks a lot for your help.
cisco4ng
---------------------------------
Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates.
---------------------------------
Love cheap thrills? Enjoy PC-to-Phone calls to 30+ countries for just 2¢/min
with Yahoo! Messenger with Voice.
=================================================
To set vacation, Out-Of-Office, or away messages, send an email to LISTSERV AT
amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed. If
you have received this email in error please notify the system manager. This
message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
