Tood/Luke,
Welcome to the club. I've been having this issue with P-1 NG Feature Pack 3
running on Solaris 9 for almost two years now. I opened many TAC cases with
Checkpoint and those checkpoint TAC engineers turned around and blamed the
problem at Sun. Luke, I am suprised when you opened the TAC case with
Checkpoint
that they didn't blame this problem on SPLAT; oh I forgot, checkpoint is
responsible
for both the OS and Apps so they are giving you the classic run-around answer.
Checkpoint TAC support has been nothing but a scam and they even have the
nerve
to tell me that I should upgrade my support to diamond support. I am NO
checkpoint
expert but in my humble opinion, I think I know just as much as some of the
checkpoint TAC engineers. Their response is always to upgrade when they
themselves can not say with confidence that upgrade will fix the problem.
I think a lot of folks in this forum is better than checkpoint TAC engineers.
By the way, who are the checkpoint TAC engineers you are working with?
Charles
Morris, Rob Hughes, David Talley, Shipi Dey? I would be interested in
knowing how
long it would take them to fix your issue(s). According to Checkpoint, they
are tier-3
level engineers. If they can not resolve the issue, it goes to Israsel.
Well, I opened
about 5 TAC cases with them and they went nowhere. Dealing with checkpoint
only raises my blood pressure.
"Marty, Lukas" <luke.marty AT NWA DOT COM> wrote:
I am experiencing the same behavior after upgrading from R55 to R61. I
haven't changed the MAX-FILE setting but have attempted just about
everything else. Opened a ticket with CP, they had me up the debug
level and test again. The output mentioned disk errors, but I'm fairly
confident this is not the issue. I had gone through the upgrade, fsck's
etc. the week before with no problems. On top of not seeing any other
issues that would point at disk failure. Their suggestions after that
were to restore my config onto a test machine and test again. Not
exactly the support I was expecting.
-Luke
Luke Marty
Network Security Engineering
-----Original Message-----
From: Mailing list for discussion of Firewall-1
[mailto:FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM] On Behalf Of Larson,
Todd (LNG-DAY)
Sent: Friday, June 30, 2006 7:20 AM
To: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
Subject: [FW-1] Provider-1 Failed to Create Version
Since our Provider-1 migration from R55 Solaris to R60 (HFA_02) Splat,
we've been experiencing a problem with "Failed to create version" errors
when attempting to create a revision when pushing policy or manually.
The problem occurs only in two of our 8 CMA's, there's plenty of Memory
and HDD space available (i.e. does not appear to be a resource issue).
I've increased the MAX-FILE (file handles) size to 100000 and restarted
the MDS, and created exactly 4 new versions in each CMA before it
started giving errors again.
Anyone else out there experience anything similar?
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates
starting at 1¢/min.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
