Firewall-1

Re: [FW-1] Dell PowerEdge 1950

Subject: Re: [FW-1] Dell PowerEdge 1950
From: pkc_mls <pkc_mls AT YAHOO DOT FR>
To: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
Date: Wed, 25 Oct 2006 08:34:39 +0200
Miguel Angel Gutierrez a écrit :
hello list,
we were evaluating a dell 1950 in order to set up SPLAT in it, and
already took a look at the hardware compatibility page:
http://www.checkpoint.com/products/supported_platforms/recommended/ngx/v
er_r60/017.html
but I didn't catch the hard drive specs so well... is it safe to say
that SPLAT can recognize, manage and work under this kind of hard
drives:
341-3094  PERC 5/i, Integrated Controller Card
341-3030  146GB, SAS, 3.5-inch 10K RPM Hard Drive
341-3084  Integrated SAS/SATA RAID 1 PERC 5/i Integrated

I wouldn't like any nasty surprises during the setup hehehe...

thank you for the comments... 
--------------------------------------------------------

for the perc5 you need specific media packs.
the supported hardware is described at this url :
http://www.checkpoint.com/products/supported_platforms/secureplatform.html

check your cds before the installation.
you can add a drive to splat during the installation only if you have an internal
floppy (usb drives, usb floppies cannot be used to add a driver).

if you're looking for the driver, dell doesn't provide it for linux RHEL3.

you need to check at lsi site for the megaraid driver for linux.

the dell 1950 requirements are detailled here :
http://www.checkpoint.com/products/supported_platforms/recommended/ngx/ver_r60/017.html

you need to pay for the medias or to use a SR ticket to obtain the media kit if you don't have the cds.

hope this'll help.



        

        
                
___________________________________________________________________________ Yahoo! Mail réinvente le mail ! Découvrez le nouveau Yahoo! Mail et son interface révolutionnaire.
http://fr.mail.yahoo.com

=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================

<Prev in Thread] Current Thread [Next in Thread>