Prior to your import can you pull up the gui to the Linux box? I have
seen the upgrade license which I skip too but then I have no problem
using the eval lic to connect. I have not been able to determine why I
see this for some imports but not all. Most imports I do are on a win2k
system for testing. Odd that other platforms work but not Linux, makes
me think there is an interface/IP issue, or bug.
-GS
-----Original Message-----
From: Mailing list for discussion of Firewall-1
[mailto:FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM] On Behalf Of
cisco4ng
Sent: Wednesday, November 22, 2006 8:27 AM
To: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
Subject: [FW-1] upgrade_export and upgrade_import issue
I built a fresh install of NGx R61 on SPLAT and configure
it as a SmartCenter and Evential Reporter add-on. After
that, I applied the license and everything is good. I then
apply HFA_01 on this box, reboot and everything is still
good. Finally I performed "upgrade_export" on this box and
transferred to my ftp server and removed this smartcenter
from the network.
I then install a fresh RedHat Linux ES 3 on another machine
having the same name as the SmartCenter/eventia reporter addon
above. I then install NGx R61 with the same option as above.
I then install HFA_01 and then reboot the box. Then I
downloaded the import file from the ftp server to this linux
box. Next, I performed "upgrade_import" and at the end, it asks
me if I want to upgrade the license file. I thought it is kinda
strange so I refused. Well, I can not log into the SmartCenter.
To confirm that my export file is good, I removed the Redhat
Linux ES 3 from the network and bring up my Solaris 9 box using
the same name as the SmartCenter NGx R61 splat box. I installed
NGxR61 with HFA_01 on the solaris box. I then performed
"upgrade_import" and it works on Solaris box without issues.
I then tried again on a Nokia IP380 installing IPSO 4.1 build 19
with Checkpoint NGx R61 and HFA_01. I configured the nokia as
SmartCenter only and performed an "upgrade_import" and it works
there too.
In summary, upgrade_import seems to have an issue from SPLAT to
Redhat Linux ES 3 especially with the licensing issue. I am
trying to findout why.
Wondering if someone has run into this issue before? Thanks.
cisco4ng
---------------------------------
Sponsored Link
Degrees online in as fast as 1 Yr - MBA, Bachelor's, Master's, Associate
- Click now to apply
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
