File created with backup command can be restored using the restore command,
this restores CP and the OS. If you have different hardware this may fail.
Using the upgrade_export file you can load to any OS or hardware of your
choice, make sure IP and host name are the same to avoid complications. Install
the same FW version, packages and hfa that was on the old system and do the
initial cpconfig, after this run the upgrade_import command importing your
export from the old system. You have a choice to do this from a tftp server on
initial setup but I have found the manual way to be more stable.
-GS
-----Original Message-----
From: Mailing list for discussion of Firewall-1 [mailto:FW-1-MAILINGLIST AT
AMADEUS.US.CHECKPOINT DOT COM] On Behalf Of Jim Johnson
Sent: Tuesday, May 22, 2007 4:03 PM
To: FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM
Subject: Re: [FW-1] Backup/Restore
1. Are you saying that you can use "upgrade_import" to import a file made
with the "backup" command?
2. Is there any way to see the list of products that the restore command
was expecting to see? That way I could simply install the missing product
and successfully re-run the restore.
3. I guess an advantage of upgrade_export over backup is that
upgrade_export will restore all products? If so what are the steps for
doing a upgrade_import? Do you need to run sysconfig and configure products
first? Do you need to be at the same HFA level first?
TIA,
Jim
> -----Original Message-----
> From: Mailing list for discussion of Firewall-1
> [mailto:FW-1-MAILINGLIST AT AMADEUS.US.CHECKPOINT DOT COM] On Behalf
> Of Reinhard Stich
> Sent: Friday, April 27, 2007 1:54 PM
> To: FW-1-MAILINGLIST AT AMADEUS.US DOT CHECKPOINTCOM
> Subject: Re: [FW-1] Backup/Restore
>
> hi,
>
> seems you did not install a part of fw1 that is on the other system.
>
> what you can do:
>
> import the splat-config that way.
>
> import the fw1-config using upgrade_export and upgrade_import
> scripts ...
>
> br
> reinhard
>
> At 20:16 27.04.2007, you wrote:
> >Hi, I try to reproduce our production environment on VirtualPC to
> >simulate an upgrade from R55 to R65. I installed R55 and I tried to
> >restore a backup done on a production server but I have this
> message :
> >
> >
> >
> >The following information will be restored:
> >[1] system
> >------------------------------------------------------------------
> >The following information will NOT be restored:
> >[2] cp_products
> >------------------------------------------------------------------
> >
> >Choose one of the following:
> >------------------------------------------------------------------
> >[C] Continue.
> >[D] Do not restore the following.
> >[R] Restore the following.
> >[Q] Quit.
> >------------------------------------------------------------------
> >
> >
> >
> >I installed the license and the same HFA (19)..
> >
> >
> >
> >What can I do ???
> >
> >Thanks
> >
> >
> >
> >
> >
> >
> >
> >-------------------------------------------
> >Marc Desaulniers
> >
> >Courriel: mdesaulniers AT v3r DOT net <mailto:mdesaulniers AT v3r DOT net>
> >
> >
> >
> >
> >
> >
> >P Avant d'imprimer, pensez à l'environnement.
> >Avertissement aux tiers :
> > Ce courriel et toute pièce qui peut y être
> > jointe sont la propriété de la Ville de
> > Trois-Rivières et sont strictement destinés à
> > la personne à qui le message est adressé. Si
> > vous les avez reçus par erreur, veuillez s.v.p.
> > les détruire et en aviser l'expéditeur par
> > courriel. Si vous n'êtes pas le destinataire du
> > message, vous n'êtes pas autorisé à utiliser,
> > copier, transférer ou divulguer, en totalité ou
> > en partie, le contenu de ce courriel et toute pièce qui
> peut y être jointe.
> >
> >=================================================> >To set vacation,
> >Out-Of-Office, or away messages,
> >send an email to LISTSERV AT amadeus.us.checkpoint DOT com
> >in the BODY of the email add:
> >set fw-1-mailinglist nomail
> >=================================================> >To unsubscribe from this
> >mailing list,
> >please see the instructions at
> >http://www.checkpoint.com/services/mailing.html
> >=================================================> >If you have any
> >questions on how to change your
> >subscription options, email
> >fw-1-owner AT ts.checkpoint DOT com
> >=================================================>
> --
> Reinhard Stich r.stich AT internet-security DOT at
> Internet Security AG, 1150 Wien, Johnstrasse 29
> Tel: +43 1 3709440 RS784-RIPE Fax: +43 1 3709440-333
>
> =================================================
> To set vacation, Out-Of-Office, or away messages,
> send an email to LISTSERV AT amadeus.us.checkpoint DOT com
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> fw-1-owner AT ts.checkpoint DOT com
> =================================================
>
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to LISTSERV AT amadeus.us.checkpoint DOT com
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
fw-1-owner AT ts.checkpoint DOT com
=================================================
|
