Re: [fw-wiz] IP Ranges

["Jason Gervia" <level7online@gmail.com>]

Hello, 

In regards to cisco PIX - there's no real way to specify a 'range' option with regards to IP addresses.  I'd suggest trying object groups and specifying which hosts you would like.

In IOS, you could potentially use subnet masks that specified 2,4,8,16, etc hosts to get the equivalent of a range, but I believe the stateful firewalling that is part of the pix won't allow that (it will deny src/destinations of networks or broadcast networks).

I agree, it would be a great thing for cisco to add in a later code release.  Unfortunately it's not here yet.



--Jason

On 3/26/07, Sergio Pozo Hidalgo <sergio@lsi.us.es> wrote:

Hi all,
I have been searcing in the list and in google about how to specify ip
ranges in different low level firewall languages.

I have read that it is possible to do that with iptables using
--ip-range parameter. But I could'nt find any information reagarding PIX
or PF using a syntax like iptables one.
I know it is possible to specify contiguous and non-contiguous ip ranges
using subnets (Subnet Calculator is a good application for that), and a
combination of deny and permit rules. But the question is if there is a
way to specify a range using the easy-to-use format of iptables:
192.168.0.1-192.168.2.20 (I know there is a mix of subnets...)

Thank you very much in advance.
Best regards,

--
Sergio Pozo Hidalgo
Quivir Research Group <www.lsi.us.es/~quivir>
University of Seville (Spain)
_______________________________________________
firewall-wizards mailing list
firewall-wizards@listserv.icsalabs.com
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards

_______________________________________________
firewall-wizards mailing list
firewall-wizards@listserv.icsalabs.com
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards