Re: [fw-wiz] PIX 515E 7.2 Duplex problem

["Sanford Reed" <sanford.reed@cox.net>]

What vintage is the PIX?

 

Some of the older PIX boxes only had Ethernet interfaces and not Fast Ethernet. It sounds like you may have one of the older boxes.

 

In the config is the interface referred to as E0 or FE0?

 

To confirm do a show tech and look at the hardware section to see if the Ethernet interface is listed as simply Ethernet or Fast Ethernet.

 

---

From: firewall-wizards-bounces@listserv.icsalabs.com [mailto:firewall-wizards-bounces@listserv.icsalabs.com] On Behalf Of Drumheller, Michael
Sent: Thursday, April 19, 2007 12:44 PM
To: firewall-wizards@listserv.icsalabs.com
Subject: [fw-wiz] PIX 515E 7.2 Duplex problem

 

The interface on the PIX shuts down when duplex is changed from auto to full.  The switch it connects to is configured for full duplex but the PIX still shows half duplex when in auto negotiate mode.  Changing to half duplex on both the switch and PIX works but the PIX interface goes down when it's changed to full duplex.  Has anyone else experienced this problem?

 

_______________________________________________
firewall-wizards mailing list
firewall-wizards@listserv.icsalabs.com
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards