By default both memory slots are used. When you order the upgrade,
you'll always get two 64 meg pieces. It's one of those old 486 or
celeron boards where you only had 2 memory slots, and the memory had to
be installed in pairs, and the memory had to be identical. So, if
you've got 64 right now, automatically means you have 32 * 2.
----- Original Message -----
From: J Alexander <jlalexander@gmail.com>
Date: Wednesday, May 9, 2007 12:51 pm
Subject: [fw-wiz] Pix 515E - Memory Upgrade
To: firewall-wizards@listserv.cybertrust.com
> I'm hoping there's an easier way than opening up the PIX to
> determine if
> both memory slots are used. I need to upgrade to 128M. It
> currently has
> 64M. Does anyone know if there is a command that will show how
> many MB each
> slot contains or something similar? Current version is 6.3(5), UR
> withFailover
>
> TIA!
> J
>
_______________________________________________
firewall-wizards mailing list
firewall-wizards@listserv.icsalabs.com
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards
|