Re: [fw-wiz] Getting OSPF to work on a CISCO ASA 5550

["Farrukh Haroon" <farrukhharoon@gmail.com>]

Keith are you using Transparent mode here?

If so, make sure the two interfaces you use for transparent mode are from the built-in chassis and not from the expansion module. 

Try setting p2p non-broadcast OSPF type for troubleshooting purposes (sending unicast msgs instead of multicast)

Regards

Farrukh

On 6/22/07, Keith A. Glass <salgak@speakeasy.net> wrote:

We've been trying, but have had little luck: ADSM config of 2 connecting OSPF routers,  but when we "show ospf nei". . .nothing.

Looking on the switch, OSPF appears to be down. . .


_______________________________________________
firewall-wizards mailing list
firewall-wizards@listserv.icsalabs.com
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards

_______________________________________________
firewall-wizards mailing list
firewall-wizards@listserv.icsalabs.com
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards