You can accomplish this in two ways:
1. Put two routers on the place of this one and solve two internal networks
to see each other trough two routers with static route.
2. if two outgoing connections are to ISPs then solution can be with one
router but with BGP so two networks can go out with both ISP
3 There is third solution also called source routing but this is not a
stable solution and can get you in major trouble.
-----Original Message-----
From: lartc-bounces@mailman.ds9a.nl [mailto:lartc-bounces@mailman.ds9a.nl]
On Behalf Of John Douglass
Sent: Monday, November 06, 2006 10:05 PM
To: lartc@mailman.ds9a.nl
Subject: [LARTC] Two uplinks, two networks and policy routing help requested
I am hoping that someone with more experience and knowledge than I can
assist me in finding a solution ;)
We have a RedHat AS4 box with 5 interfaces. Two interfaces serve two
different networks and two interfaces connect to two different uplinks.
The fifth interface is our management interface.
Since a picture is worth a thousand words I attempted to come up with a
diagram:
http://studpup74.googlepages.com/networkproblem
(I did not want to post this image to the list :)
If anyone with this experience has a few moments to assist us, I would
be very grateful. Let me know if you need additional information.
- John Douglass, Georgia Tech
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
|