LARTC
[Top] [All Lists]

[LARTC] need bandwidth manager

To: lartc@mailman.ds9a.nl
Subject: [LARTC] need bandwidth manager
From: Seye Omotoso <iam4u4real@yahoo.com>
Date: Wed, 15 Nov 2006 03:05:00 -0800 (PST)
Delivered-to: sp-com-lists@consult.net
Delivered-to: lartc-list@securepoint.com
Delivered-to: lartc@outpost.ds9a.nl
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=3PesWhS4VOcKUijcWFwhEVZ7ywASWODq6eDI2pCC7AMN6Se81XFD5a/uoJWkm0GKK8MgnlMIvjBSpnvkN9lQV4zRKUhHwaPOV6HLpZDXtr2m833qTqSEYTxMCC5AQFX7BhlEDbdTtIN/53CDMFM3qRjrVnFFxGqq7UP0tlSA+wc= ;
List-archive: <http://mailman.ds9a.nl/pipermail/lartc>
List-help: <mailto:lartc-request@mailman.ds9a.nl?subject=help>
List-id: "Mailinglist of the Linux Advanced Routing &amp; Traffic Control project" <lartc.mailman.ds9a.nl>
List-post: <mailto:lartc@mailman.ds9a.nl>
List-subscribe: <http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc>, <mailto:lartc-request@mailman.ds9a.nl?subject=subscribe>
List-unsubscribe: <http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc>, <mailto:lartc-request@mailman.ds9a.nl?subject=unsubscribe>
Sender: lartc-bounces@mailman.ds9a.nl
dear sir,

i want to install and configure bandwidth manager
using Rednat Linux server, i saw the codes to use from
website but the problem is how to apply the code, will
i be entering the code one after the other at shell
prompt or put it in a notepad or how can I use the
codes? 

I am a network engineer and I am new to using Linux
Sever. Thank you

Regards,
Seye


 
____________________________________________________________________________________
Sponsored Link

Online degrees - find the right program to advance your career.
Www.nextag.com
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

<Prev in Thread] Current Thread [Next in Thread>