LARTC
[Top] [All Lists]

[LARTC] HTB and bridge

To: lartc@mailman.ds9a.nl
Subject: [LARTC] HTB and bridge
From: alan tan <alancupid@yahoo.com>
Date: Thu, 16 Nov 2006 19:50:27 -0800 (PST)
Delivered-to: sp-com-lists@consult.net
Delivered-to: lartc-list@securepoint.com
Delivered-to: lartc@outpost.ds9a.nl
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type; b=VuMUqQf4+bOPRkCem8cD0stXO0cwTEGJPTYHIqjgJU6lIC5xwsx113sn59DvQeUYlBx9+8r+D9TEzZLYDGl6/wMBwMNUcyiI6uL075jQquyGApab6wI2HS/cxOXg8n/xLcTwFOZjj6lbQWY3IzbuIpFpgVRltmSO6BIHKpbcP2w= ;
List-archive: <http://mailman.ds9a.nl/pipermail/lartc>
List-help: <mailto:lartc-request@mailman.ds9a.nl?subject=help>
List-id: "Mailinglist of the Linux Advanced Routing &amp; Traffic Control project" <lartc.mailman.ds9a.nl>
List-post: <mailto:lartc@mailman.ds9a.nl>
List-subscribe: <http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc>, <mailto:lartc-request@mailman.ds9a.nl?subject=subscribe>
List-unsubscribe: <http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc>, <mailto:lartc-request@mailman.ds9a.nl?subject=unsubscribe>
Sender: lartc-bounces@mailman.ds9a.nl
I have 2 nic card with fedora installed. Now, do i need to install any bridge or gateway? or straight install and configue HTB? My objective is to limit bandwidth in and out from the ethernet card.

Thanks

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
<Prev in Thread] Current Thread [Next in Thread>