[LARTC] RSVP/RSVP6 Enabling a linux box is not working: Why ?

["Pedro Miguel da Fonseca Marques Ferreira" <pmferr@dei.uc.pt>]

Hi. I just went thru reading all of the howto and have a working implementation of RSVP over UDP encapsulation that i would linke to test, made in Java.

For this, I would like to use a Linux Box as a RSVP enabled router. However, I have tried and tried to make RSVP work on linux and failed.

So I wonder what I am doing wrong.

 

            Basically, on the linux box what I am doing is turning eth0 and eth1 to CBQ with bandwidth 100Mbps and avpkt 1500 bytes:

 

            Tc qdisc add dev eth0 root cbq bandwidth 100Mbps avpkt 1500

            Tc qdisc add dev eth1 root cbq bandwidth 100Mbps avpkt 1500

 

Then I add filters for rsvp, for example:

 

            Tc filter add dev eth0 parent 8000: protocol ip rsvp

            Tc filter add dev eth1 parent 8001: protocol ip rsvp

 

But, on my windows XP box, when I try to pathping –n –R the linux box, it says the linux box is not RSVP AWARE.

 

Can someone give-me a hint on what am I doing wrong here ? Also, can someone clarify me as if linux RSVP supports UDP encapsulation as the Standard RSVP provides on ports 1698,1699 ?

(RFC2205)

 

Any help appreciated.

 

Thank you.

 

 

 

Pedro Miguel da Fonseca Marques Ferreira, Lic. MsC.

PhD Student at DEI-FCTUC, University of Coimbra

Polo II, Pinhal de Marrocos

3030 Coimbra

Portugal

Email: pmferr@dei.uc.pt

Web: http://eden.dei.uc.pt/~pmferr/

 

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc