Re: [LARTC] egress bandwidth not limited / limited extremely inaccurately

[Andy Furniss <lists@andyfurniss.entadsl.com>]

Roman Skula wrote:
> Andy Furniss napisał(a):
>
> > Roman Skula wrote:
> >
> > > 05:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5714
> > > Gigabit Ethernet (rev a3)
> > You may need to turn off segmentation offload with ethtool -k
> A huge, wet kiss for you, this turned my sky blue again. :)
Lol - I forgot to mention: be carefull about using htb default, your 
arp/other link layer end up there. If you don't specify a default htb 
will let them through unshaped, you can make a filter to catch the 
unclassified IP traffic and send it to the class you want.
Andy.

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc