Hello Andy,
How do one create such a filter to catch arp/other link layer traffic? Can
you give us one such example?
Thanks,
-nik
----- Original Message -----
From: "Andy Furniss" <lists@andyfurniss.entadsl.com>
To: "Roman Skula" <roman@skula.com>
Cc: <lartc@mailman.ds9a.nl>
Sent: Wednesday, January 17, 2007 10:18 PM
Subject: Re: [LARTC] egress bandwidth not limited / limitedextremely
inaccurately
> Roman Skula wrote:
> > Andy Furniss napisał(a):
> >
> >>Roman Skula wrote:
> >>
> >>>05:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5714
> >>>Gigabit Ethernet (rev a3)
> >>
> >>You may need to turn off segmentation offload with ethtool -k
> >
> > A huge, wet kiss for you, this turned my sky blue again. :)
>
> Lol - I forgot to mention: be carefull about using htb default, your
> arp/other link layer end up there. If you don't specify a default htb
> will let them through unshaped, you can make a filter to catch the
> unclassified IP traffic and send it to the class you want.
>
> Andy.
>
> _______________________________________________
> LARTC mailing list
> LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
|