LARTC
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[LARTC] Thoughput

from [Dan] [Permanent Link][Original]
To: <lartc@mailman.ds9a.nl>
Subject: [LARTC] Thoughput
From: "Dan" <dan@34q.eu>
Date: Wed, 24 Jan 2007 17:22:14 -0000
Delivered-to: sp-com-lists@consult.net
Delivered-to: lartc-list@securepoint.com
Delivered-to: lartc@outpost.ds9a.nl
List-archive: <http://mailman.ds9a.nl/pipermail/lartc>
List-help: <mailto:lartc-request@mailman.ds9a.nl?subject=help>
List-id: "Mailinglist of the Linux Advanced Routing &amp; Traffic Control project" <lartc.mailman.ds9a.nl>
List-post: <mailto:lartc@mailman.ds9a.nl>
List-subscribe: <http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc>, <mailto:lartc-request@mailman.ds9a.nl?subject=subscribe>
List-unsubscribe: <http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc>, <mailto:lartc-request@mailman.ds9a.nl?subject=unsubscribe>
Sender: lartc-bounces@mailman.ds9a.nl
Thread-index: Acc/3DDc3BeIktxXQSe3YP8hd9mUzQ==

Hi,

 

I am after a feel of the throughput capabilities for TC and Iptables in comparison to dedicated hardware. I have heard talk about 1Gb+ throughput with minimal performance impact using 50ish TC rules and 100+ Iptables rules.

 

Is there anyone here running large throughput / large configurations, and if so, what sort of figures?

 

Regards

 

Dan

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [LARTC] know if packets are marked, Andreas Unterkircher
Next by Date:  [LARTC] Where can I get a patch to use ipt_time module on POSROUTING chain, Sébastien CRAMATTE
Previous by Thread:  [LARTC] ip alias + dsl modem, GodSharp
Next by Thread:  Re: [LARTC] Thoughput, Marek Kierdelewicz
Indexes:  [Date] [Thread] [Top] [All Lists]