[LARTC] possible packet forwarding or routing problem

[John covici <covici@ccs.covici.com>]

Hi.  I have a system with two network cards -- eth0 is a public ip
address and eth1 is on an internal network.  Now I have all the packet
forwards enabled, and there is a route from eth1 to the internal
network, but if a computer on the internal network sets his gateway to
the box, he can't traceroute  past the box to the internet.   There
are no iptable rules yet.

Here is the routing table as produced by route.
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
64.183.125.208  *               255.255.255.248 U     0      0        0 eth0
192.168.1.0     *               255.255.255.0   U     0      0        0 eth1
169.254.0.0     *               255.255.0.0     U     0      0        0 eth0
default         rrcs-64-183-125 0.0.0.0         UG    0      0        0 eth0


What am I doing wrong here?

Any assistance would be appreciated.

-- 
Your life is like a penny.  You're going to lose it.  The question is:
How do
you spend it?

         John Covici
         covici@ccs.covici.com
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc