[LARTC] Bridging multiple vlans on linux router

[Ivan Vladimirov <administrator@netwlan.net>]

Hi,
I have a situation where router has to see hosts  in multiple vlans
with the same IP address
The test scenario is :
---------------------
|  eth0 |     br0   | <-------> eth1.25 | eth1.26 | eth1.27
---------------------
eth0 = Internet
br0 = Lan 192.168.100.1/24

host 1= 192.168.100.11/24 eth1.25
host 2= 192.168.100.12/24 eth1.26

I need br0 to see all hosts in all vlans but hosts in different vlans
not to see  each other.
Is there any way to do this with ebtables without making to many rules?

 

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc