LARTC
[Top] [All Lists]

[LARTC] TC Filter matching all

To: lartc@mailman.ds9a.nl
Subject: [LARTC] TC Filter matching all
From: Michał Margula <alchemyx@uznam.net.pl>
Date: Tue, 20 Mar 2007 14:20:30 +0100
Delivered-to: sp-com-lists@consult.net
Delivered-to: lartc-list@securepoint.com
Delivered-to: lartc@outpost.ds9a.nl
List-archive: <http://mailman.ds9a.nl/pipermail/lartc>
List-help: <mailto:lartc-request@mailman.ds9a.nl?subject=help>
List-id: "Mailinglist of the Linux Advanced Routing &amp; Traffic Control project" <lartc.mailman.ds9a.nl>
List-post: <mailto:lartc@mailman.ds9a.nl>
List-subscribe: <http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc>, <mailto:lartc-request@mailman.ds9a.nl?subject=subscribe>
List-unsubscribe: <http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc>, <mailto:lartc-request@mailman.ds9a.nl?subject=unsubscribe>
Sender: lartc-bounces@mailman.ds9a.nl
User-agent: Thunderbird 1.5.0.10 (X11/20070303)
Hello!

I was always using "default" in HTB to choose default class, but now I need to do it with filters. Tried following command:

# tc filter add dev eth0 protocol ip parent 10: prio 2 flowid 10:2
Unknown filter "flowid", hence option "10:2" is unparsable

It is from example in LARTC Howto.

My question is then - how to make a filter matching all without eating too much CPU cycles?

Thanks

--
Michał Margula, alchemyx@uznam.net.pl, http://alchemyx.uznam.net.pl/
"W życiu piękne są tylko chwile" [Ryszard Riedel]
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

<Prev in Thread] Current Thread [Next in Thread>