Re: [LARTC] TC Filter matching all

[Andreas Unterkircher <unki@netshadow.at>]

I use this one for "match anything"
http://mailman.ds9a.nl/pipermail/lartc/2005q3/016774.html

Andreas

Quoting Michał Margula <alchemyx@uznam.net.pl>:

> Hello!
>
>         I was always using "default" in HTB to choose default class, but now I
> need to do it with filters. Tried following command:
>
> # tc filter add dev eth0 protocol ip parent 10: prio 2 flowid 10:2
> Unknown filter "flowid", hence option "10:2" is unparsable
>
> It is from example in LARTC Howto.
>
> My question is then - how to make a filter matching all without eating
> too much CPU cycles?
>
> Thanks
>
> --
> Michał Margula, alchemyx@uznam.net.pl, http://alchemyx.uznam.net.pl/
> "W życiu piękne są tylko chwile" [Ryszard Riedel]
> _______________________________________________
> LARTC mailing list
> LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc


_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc