LARTC
[Top] [All Lists]

[LARTC] Re: Shaping based on Vlan tag

To: Samit <janasamit@wlink.com.np>
Subject: [LARTC] Re: Shaping based on Vlan tag
From: Amin Azez <azez@ufomechanic.net>
Date: Thu, 22 Mar 2007 09:24:30 +0000
Cc: lartc@mailman.ds9a.nl
Delivered-to: sp-com-lists@consult.net
Delivered-to: lartc-list@securepoint.com
Delivered-to: lartc@outpost.ds9a.nl
In-reply-to: <46019065.4010901@wlink.com.np>
List-archive: <http://mailman.ds9a.nl/pipermail/lartc>
List-help: <mailto:lartc-request@mailman.ds9a.nl?subject=help>
List-id: "Mailinglist of the Linux Advanced Routing &amp; Traffic Control project" <lartc.mailman.ds9a.nl>
List-post: <mailto:lartc@mailman.ds9a.nl>
List-subscribe: <http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc>, <mailto:lartc-request@mailman.ds9a.nl?subject=subscribe>
List-unsubscribe: <http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc>, <mailto:lartc-request@mailman.ds9a.nl?subject=unsubscribe>
References: <46019065.4010901@wlink.com.np>
Sender: lartc-bounces@mailman.ds9a.nl
User-agent: Thunderbird 1.5.0.10 (X11/20070306)
* Samit wrote, On 21/03/07 20:07:
> Hi all,
> 
> A new member and new post.
> 
> Is it possible to manage bandwidth marking the packets based on VLAN
> tags using ebtables?

If ebtables can match a vlan tag then you can set a mark on PREROUTING
based on the vlan tag.

You can use this mark in the tc classification to select packets to
traffic classes for shaping.

Sam
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

<Prev in Thread] Current Thread [Next in Thread>