SuSE10.2
Linux Kernel 2.6.18 Patched,
Whenever I try to establish a connection raccoon fails
giving the following error.
Raccoon config #################
remote 67.101.176.***
{
exchange_mode main,aggressive;
doi ipsec_doi;
situation identity_only;
my_identifier address;
send_cr off;
send_cert off;
lifetime time 2 min; # sec,min,hour
initial_contact on;
proposal_check obey; # obey, strict or claim
proposal {
encryption_algorithm 3des;
hash_algorithm sha1;
authentication_method
pre_shared_key;
dh_group 2;
}
}
ERROR MESSAGE ################
2007-03-22 14:53:53: INFO:
begin Identity Protection mode.
2007-03-22 14:53:53: INFO:
received Vendor ID: DPD
2007-03-22 14:53:53: ERROR:
Invalid CR type 0
Rowan Reid, Job Captain
STUDIO 3
ARCHITECTS
Upland
Newport
Inglewood
310 • 693 • 0585 Ext. 104
310 • 693 • 0593 FAX
www • STUDIO3ARC •
COM
Disclaimer
The
information included in this communication is sent
to you on an “as-is” basis, you are advised that Studio 3
Architects and their consultants make no warranties, expressed or implied, as
to the correctness or condition of this information unless specifically
stated otherwise. In no event shall Studio 3 Architects and their consultants
be liable for damages arising from the use or misuse of the above mentioned. This
communication may contain privileged or other confidential information. If you
have received it in error, please advise the sender by reply email and
immediately delete the message and any attachments without copying or
disclosing the contents. Use of this
information by you or others is an acknowledgement that the user has read,
understands, and agrees to the aforementioned terms and conditions.