[LARTC] Shape own router

["Salatiel Filho" <salatiel.filho@gmail.com>]

On 3/22/07, Andy Furniss <lists@andyfurniss.entadsl.com> wrote:
> Salatiel Filho wrote:
> > On 2/19/07, Salatiel Filho <salatiel.filho@gmail.com> wrote:
> >
> >> Well , thanks to imq all my client machines are now shaped and
> >> everything is great ...
> >> But now i have a doubt , is there a way to shape the traffic that goes
> >> to the route [doing a wget from the router for example ]?
> >>
> >>
> >> I have a PREROUTING IMQ0 and a POSTROUTING IMQ1 , everything is
> >> working like i`d expect but i`d like to be able to shape download from
> >> the router in the same htb qdisc provide by IMQ1. is there a way ?
> >>
> >> --
> >> []'s
> >> Salatiel
> >>
> >> "O maior prazer do inteligente é bancar o  idiota
> >>    diante de um  idiota que banca o inteligente".
> >>
> >
> > no ideas ?
>
> Assuming 2.6
>
> You need to use the prerouting imq, but unless you are doing nat and
> need to seperate local/forwarded you can use ifb and save patching.
Where can i read about IFB ? I try to google but i can not find too
much info. maybe i am looking for the wrong words.  Maybe this is the
solution, cause i would like to put both local traffic and forwarded
traffic in the same htb queue.

> If you really need imq you will need to check first imq option in kernel
> config is set to A.
If i put after NAT in prerouting , how can i shape upload by IP ?


> Andy.

--
[]'s
Salatiel

"O maior prazer do inteligente é bancar o  idiota
  diante de um  idiota que banca o inteligente".


--
[]'s
Salatiel

"O maior prazer do inteligente é bancar o  idiota
  diante de um  idiota que banca o inteligente".
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc