LARTC
[Top] [All Lists]

Re: [LARTC] 2 NICs Bridge + Router

To: Mail List - Linux Advanced Routing and Traffic Control <lartc@mailman.ds9a.nl>
Subject: Re: [LARTC] 2 NICs Bridge + Router
From: Grant Taylor <gtaylor@riverviewtech.net>
Date: Mon, 28 May 2007 13:39:13 -0500
Delivered-to: sp-com-lists@consult.net
Delivered-to: lartc-list@securepoint.com
Delivered-to: lartc@outpost.ds9a.nl
In-reply-to: <4D411FB02758FE45915E9724339093F62E4DE2@intranet.scpl.local>
List-archive: <http://mailman.ds9a.nl/pipermail/lartc>
List-help: <mailto:lartc-request@mailman.ds9a.nl?subject=help>
List-id: "Mailinglist of the Linux Advanced Routing &amp; Traffic Control project" <lartc.mailman.ds9a.nl>
List-post: <mailto:lartc@mailman.ds9a.nl>
List-subscribe: <http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc>, <mailto:lartc-request@mailman.ds9a.nl?subject=subscribe>
List-unsubscribe: <http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc>, <mailto:lartc-request@mailman.ds9a.nl?subject=unsubscribe>
References: <4D411FB02758FE45915E9724339093F62E4DE2@intranet.scpl.local>
Sender: lartc-bounces@mailman.ds9a.nl
User-agent: Thunderbird 2.0.0.0 (Windows/20070326)
On 5/28/2007 8:12 AM, William Bohannan wrote:
Hi wondering if anyone can help. I have two NICs on a debian sarge based system and current running as a bridge (br0) which consists of eth0 and eth1. Is it possible to add a virtual interface to the eth1 so I can also do NAT on the box as well? I have tried many times and keep coming up with errors.

Why not add virtual aliased interfaces to the br0 interface? Do your NATing there.



Grant. . . .
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

<Prev in Thread] Current Thread [Next in Thread>