Re: [LARTC] rate limiting netmask w/ dd-wrt

[Andy Furniss <lists@andyfurniss.entadsl.com>]

Ryan O'Toole wrote:
> I'm trying to setup a DD-WRT router (www.dd-wrt.com; embedded micro-device
> linux for the uninitiated) to rate limit all the traffic it receives from
> its wi-fi interface.
Qdiscs work on traffic leaving the interfaces. If you want to limit 
incoming traffic have a look at the policer example in LARTC, there are 
other ways using ifb/imq, but I don't know if dd-wrt will have those.
Wireless is a special case - half duplex, so it's going to be even 
harder to do.
Andy.

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc