Re: [LARTC] Routing NDAS ?

[Grant Taylor <gtaylor@riverviewtech.net>]

On 06/22/07 16:31, Andrew Lyon wrote:
> the two segments are linked by a linux box that is doing routing and 
> proxy arp,
Please bridge and do not use Proxy ARP.  Or if you really want to use 
Proxy ARP make sure that you are only Proxy ARPing for the MAC addresses 
of the NDAS device(s) and the client(s) that need to connect to it.
> can anybody suggest a way that I could access the ndas devices,
Set up a bridging router (a.k.a. brouter) to bridge all layer 2 traffic 
except for IP (and a few other select protocols) traffic.  You may only 
want to bridge traffic that is from the NDAS and or its client(s) and 
route the rest (DROP in the BROUTING chain of the broute table).


Grant. . . .
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc