Hello 吴明津,
Maybe in your filter statement you should use src rather than dst? It is
not clear what interface is connected to what hosts.
HTH,
-Nik
吴明津 wrote:
> I try to use tc on mips with linux-2.4.18 but the u32 filter dosn't work
>
> I added htb qdisc to linux-2.4.18 and use it to limit the speed in
> LAN, it only work well on the default class, for example
>
> tc qdisc add dev eth0 root handle 1: htb default 10
> tc class add dev eth0 parent 1:0 classid 1:1 htb rate 2000kbit
> tc class add dev eth0 parent 1:1 classid 1:10 htb rate 500kbit ceil 500kbit
> tc calss add dev eth0 parent 1:1 classid 1:11 htb rate 300kbit ceil 300kbit
> tc filter add dev eth0 protocol ip u32 match ip dst 192.168.18.100
> flowid 1:11
>
> the host 192.168.18.100 have a speed of 500kbit rather than 300kbit.
>
> if I don't set the default 10 class, all this dosn't have any effect.
>
> why?
>
> thank you.
> _______________________________________________
> LARTC mailing list
> LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
|