[LARTC] Re: tc filter not work, why?

["吴明津" <womking@gmail.com>]

Does the tc and the linux kernel net/sched/ version must match
exactly? or the kernel configuration miss some modules?

I have compiled in all the Qos and/or fair queueing.

thank you for your help.

On 7/26/07, 吴明津 <womking@gmail.com> wrote:
> I try to use tc on mips with linux-2.4.18 but the u32 filter dosn't work
>
> I added htb qdisc to linux-2.4.18 and use it to limit the speed in
> LAN, it only work well on the default class, for example
>
> tc qdisc add dev eth0 root handle 1: htb default 10
> tc class add dev eth0 parent 1:0 classid 1:1 htb rate 2000kbit
> tc class add dev eth0 parent 1:1 classid 1:10 htb rate 500kbit ceil 500kbit
> tc calss add dev eth0 parent 1:1 classid 1:11 htb rate 300kbit ceil 300kbit
> tc filter add dev eth0 protocol ip u32 match ip dst 192.168.18.100 flowid 1:11
>
> the host 192.168.18.100 have a speed of 500kbit rather than 300kbit.
>
> if I don't set the default 10 class, all this dosn't have any effect.
>
> why?
>
> thank you.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc