As another option, you may be able to work without the interface. Try "Enable
NAT-Traversal" on the firewall (VPN-Autokey Advanced-Gateway-Edit-Advanced)
Regards
Joe Blair
"Push yourself further, because providing great service is not a rehearsal."
EZY-TECH
Top quality, competitively priced IT products and services
f. 09-377-6109
m. 0275 776 283
e. joe.blair@ezytech.co.nz
w. www.ezytech.co.nz
-----Original Message-----
From: nn-bounces@qorbit.net [mailto:nn-bounces@qorbit.net] On Behalf Of Richard
Dumoulin
Sent: Wednesday, 29 November 2006 5:46 a.m.
To: Michael Tiede; nn@qorbit.net
Subject: [nn] RE : NS-Remote Client @ WinXP/2K
Hi Michael, I had the same issue. I was finally able to use it by unistalling
and intalling it several times until the adapter showed up. I know it's a crap
tip but it worked in the end
-- Richard
-----Message d'origine-----
De : nn-bounces@qorbit.net [mailto:nn-bounces@qorbit.net] De la part de Michael
Tiede Envoyé : Tuesday, November 28, 2006 5:14 PM À : nn@qorbit.net Objet :
[nn] NS-Remote Client @ WinXP/2K
Hi there!
I'm seeing strange problems installing the NS-Remote Client.
Installation works fine except for one point, the VA Adapter is not beeing
installed after finishing the installation and rebooting. During the
installation the installer says that the drivers for the VA adapter are
installed fine but no additional (virtual) adapter shows up in the network
connections.
I can reproduce this behavior under Win XP with SP2 on IBM notebooks with
Broadcom NetXtreme NICs but also on an old standard PC with 3COM Etherlink XL
NIC running on Win 2K.
Without the VA adapter I can setup and establish IPSec connections but am not
able to uses them without the virtual interface.
(As always) the Juniper KB doesn't have any hint on this issue.
Any ideas are highly welcome!
Cheers,
Michael
--
Michael Tiede
Systemadministration Live-Systeme
_______________________________________________
nn mailing list
nn@qorbit.net
http://qorbit.net/mailman/listinfo/nn
**********************************************************************
Any opinions expressed in the email are those of the individual and not
necessarily the company. This email and any files transmitted with it are
confidential and solely for the use of the intended recipient. If you are not
the intended recipient or the person responsible for delivering it to the
intended recipient, be advised that you have received this email in error and
that any dissemination, distribution, copying or use is strictly prohibited.
If you have received this email in error, or if you are concerned with the
content of this email please e-mail to: e-security.support@vanco.info
The contents of an attachment to this e-mail may contain software viruses which
could damage your own computer system. While the sender has taken every
reasonable precaution to minimise this risk, we cannot accept liability for any
damage which you sustain as a result of software viruses. You should carry out
your own virus checks before opening any attachments to this e-mail.
**********************************************************************
_______________________________________________
nn mailing list
nn@qorbit.net
http://qorbit.net/mailman/listinfo/nn
_______________________________________________
nn mailing list
nn@qorbit.net
http://qorbit.net/mailman/listinfo/nn
|