Re: [nn] Monitoring of Juniper to Cisco VPN

[Joe Loiacono <jloiacon@csc.com>]

There is a capability called 'vpnmonitor'
(e.g., get vpn shows a 'monitor' option.) Maybe if you turn this on, it
will keep something in the MIB.

Joe

"Troy Coulombe" <TCoulombe@telecomsys.com>
Sent by: nn-bounces@qorbit.net

01/26/2007 02:03 PM

To	<nn@qorbit.net>
cc
Subject	[nn] Monitoring of Juniper to Cisco VPN

Trying to find the MIB [or _a method_
] to know when a Juniper [local] to Cisco [remote] VPN is up or down.

Using a MIB walker, we can’t find anything that will tell us when the VPN is up/down… looking for the IKE state I guess…

We have the VPN tied to a tunnel interface, however the tunnel interface being virtual, is always up.

Thoughts?  Thanks.

--

TroyC

C: 425.299.8305

D: 206.792.2356

 

The information contained in this message may be privileged and/or confidential. If you are not the intended recipient, or responsible for delivering this message to the intended recipient, any review, forwarding, dissemination, distribution or copying of this communication or any attachment(s) is strictly prohibited. If you have received this message in error, please so notify the sender immediately, and delete it and all attachments from your computer and network.

 _______________________________________________
nn mailing list
nn@qorbit.net
http://qorbit.net/mailman/listinfo/nn

_______________________________________________
nn mailing list
nn@qorbit.net
http://qorbit.net/mailman/listinfo/nn