Yea, unfortunately, that’s only an
option from a Juniper to Juniper [and works perfectly for J to J]. In
fact, Juniper to Cisco, if you have this option enabled, the VPN will not come
up [had opened a JTAC case to find this out the hard way]
--
TroyC
c: 425.299.8305
d: 206.792.2356
From: Joe Loiacono
[mailto:jloiacon@csc.com]
Sent: Friday, January 26, 2007
11:37 AM
To: Troy
Coulombe
Cc: nn@qorbit.net;
nn-bounces@qorbit.net
Subject: Re: [nn] Monitoring of
Juniper to Cisco VPN
There is a capability called 'vpnmonitor' (e.g., get
vpn shows a 'monitor' option.) Maybe if you turn this on, it will keep
something in the MIB.
Joe
|
"Troy Coulombe"
<TCoulombe@telecomsys.com>
Sent
by: nn-bounces@qorbit.net
01/26/2007 02:03 PM
|
|
To
|
<nn@qorbit.net>
|
|
cc
|
|
|
Subject
|
[nn] Monitoring of Juniper to Cisco VPN
|
|
Trying to find the MIB [or _a method_
] to know when a Juniper [local] to Cisco [remote] VPN is up or down.
Using
a MIB walker, we can’t find anything that will tell us when the VPN is
up/down… looking for the IKE state I guess…
We
have the VPN tied to a tunnel interface, however the tunnel interface being
virtual, is always up.
Thoughts?
Thanks.
--
TroyC
C:
425.299.8305
D:
206.792.2356
The
information contained in this message may be privileged and/or confidential. If
you are not the intended recipient, or responsible for delivering this message
to the intended recipient, any review, forwarding, dissemination, distribution
or copying of this communication or any attachment(s) is strictly prohibited.
If you have received this message in error, please so notify the sender
immediately, and delete it and all attachments from your computer and network.
_______________________________________________
nn mailing list
nn@qorbit.net
http://qorbit.net/mailman/listinfo/nn