Hi,
I think the patch is incomplete.
Maybe your e-mail exceeded the message size limit of the list.
Or some mistake ?
[In portuguese]
Parece que o teu patch está incompleto.
Será que o teu mail excedeu o limite permitido pela lista, ou tu te
enganas-te nalguma coisa ?
[/In Portuguese]
Best Regards,
Mário Gamito
Carlos wrote:
> Hi peoples,
>
> I make one simple howto and patch to install and configure qmail-ldap
> authenticate in AD.
>
> its attached the Howto and patch.
>
> excuse by my english
>
> good luck
>
>
> Carlos
>
>
> ------------------------------------------------------------------------
>
> ========================================
> QMAIL-LDAP + AD INTEGRATE
> ========================================
>
> * Objective
>
> Authenticate Windows AD Server with qmail-ldap.
>
> * System tested
>
> Windows 2003 Server with SP2
> OpenSuse Linux-10.2 and Ubuntu 6.10
> qmail-ldap-1.03-20060201.patch
>
> * Install process
>
> First install Windows 2003 Server, and after finish installation,
> install SFU (MS Services for Unix) with NIS support.
> After this add new user in AD and in new tab "Unix Attributtes" choose
> the domain and click in OK.
> Change again the user password.
>
> FINISH :-)
>
>
> Now in you linux system, see the steps of site
> http://www.qmail-ldap.org/wiki/Full_Installation_Guide.
> In step "Basic Qmail Installation"
>
> After apply qmail-ldap patch.
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> cd /usr/local/src
> wget http://200.4.48.8/pub/mail-tools/qmail/dist/qmail-1.03.tar.gz
> wget http://www.nrg4u.com/qmail/qmail-ldap-1.03-20060201.patch.gz
> tar xvfz qmail-1.03.tar.gz
> cd qmail-1.03
> zcat ../qmail-ldap-1.03-20060201.patch.gz | patch -p1
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> Apply my patch
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> cd /usr/local/src/qmail-1.03
> patch -p1 < /var/src/qmail-ad.patch
> patching file Makefile
> patching file qmail-ldap.h
> patching file qmail-ldaplookup.c
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
> And continue the steps from site.
>
> Finish :D
>
>
> -----------------------------------------------------------
> My control files (my domain is test.com)
>
> ldapbasednldapdefaultdotmode
> cn=Users,dc=test,dc=com
>
> ldapdefaultdotmode
> both
>
> ldaplogin
> cn=Administrador,cn=Users,dc=test,dc=com
>
> ldapmessagestore
> /home/vmail
>
> ldapobjectclass
> User
>
> ldappassword
> mypass
>
> ldapserver (Ip address of AD)
> 192.168.2.11
>
> ldapuid
> 11184
>
> ldapgid
> 2110
> ---------------------------------------------------------
>
>
> good luck
>
>
>
>
>
> Carlos Cesario
> carloscesario@gmail.com
>
>
> ------------------------------------------------------------------------
>
> diff -uNr qmail-1.03.Ori/Makefile /var/src/qmail-1.03.ORI/Makefile
> --- qmail-1.03.Ori/Makefile 2007-04-05 06:19:17.000000000 -0300
> +++ /var/src/qmail-1.03.ORI/Makefile 2007-03-07 15:46:34.000000000 -0300
> @@ -19,7 +19,7 @@
> # -DQMQP_COMPRESS to use the QMQP on the fly compression (for clusters)
> # -DQUOTATRASH to include the Trash in the quota calculation (normaly it is
> not)
> # -DSMTPEXECCHECK to enable smtp DOS/Windows executable detection
> -#LDAPFLAGS=-DQLDAP_CLUSTER -DEXTERNAL_TODO -DDASH_EXT -DDATA_COMPRESS
> -DQMQP_COMPRESS -DSMTPEXECCHECK
> +LDAPFLAGS=-DQLDAP_CLUSTER -DEXTERNAL_TODO -DDASH_EXT -DDATA_COMPRESS
> -DQMQP_COMPRESS -DSMTPEXECCHECK -DALTQUEUE
>
> # Perhaps you have different ldap libraries, change them here
> LDAPLIBS=-L/usr/local/lib -lldap -llber
> @@ -33,7 +33,7 @@
> #LDAPINCLUDES=-I/opt/OpenLDAP/include
>
> # ZLIB needed for -DDATA_COMPRESS and -DQMQP_COMPRESS
> -#ZLIB=-lz
> +ZLIB=-lz
> # or you installed zlib in a different path you can use something like this
> #ZLIB=-L/opt/zlib/lib -lz
> #ZINCLUDES=-I/opt/zlib/include
> @@ -43,13 +43,13 @@
> # use -DTLS_REMOTE to enable tls support in qmail-remote
> # use -DTLS_SMTPD to enable tls support in qmail-smtpd
> # use -DTLSDEBUG to enable additional tls debug information in qmail-remote
> -#TLS=-DTLS_REMOTE -DTLS_SMTPD
> +TLS=-DTLS_REMOTE -DTLS_SMTPD
> # Path to OpenSSL includes
> -#TLSINCLUDES=-I/usr/local/include
> +TLSINCLUDES=-I/usr/local/include
> # Path to OpenSSL libraries
> -#TLSLIBS=-L/usr/local/lib -lssl -lcrypto
> +TLSLIBS=-L/usr/local/lib -lssl -lcrypto
> # Path to OpenSSL binary
> -#OPENSSLBIN=/usr/local/bin/openssl
> +OPENSSLBIN=/usr/bin/openssl
> #OPENSSLBIN=openssl
>
> # to make the Netscape download progress bar work with qmail-pop3d
> @@ -57,13 +57,13 @@
> MNW=-DMAKE_NETSCAPE_WORK
>
> # to enable the auto-maildir-make feature uncomment the next line
> -#MDIRMAKE=-DAUTOMAILDIRMAKE
> +MDIRMAKE=-DAUTOMAILDIRMAKE
>
> # to enable the auto-homedir-make feature uncomment the next line
> -#HDIRMAKE=-DAUTOHOMEDIRMAKE
> +HDIRMAKE=-DAUTOHOMEDIRMAKE
>
> # on most systems we need this to make auth_pop and auth_imap
> -#SHADOWLIBS=-lcrypt
> +SHADOWLIBS=-lcrypt
> # OpenBSD and other Systems do not have libcrypt, so comment the line out
> # if you get linking problems.
> # To use shadow passwords under some Linux OS, uncomment the next two lines.
> @@ -73,7 +73,7 @@
>
> # to enable the possibility to log and debug imap and pop uncoment the
> # next line
> -#DEBUG=-DDEBUG
> +DEBUG=-DDEBUG
> # WARNING: you need a NONE DEBUG auth_* to run with inetd
>
> # for profiling ...
> diff -uNr qmail-1.03.Ori/qmail-ldap.h /var/src/qmail-1.03.ORI/qmail-ldap.h
> --- qmail-1.03.Ori/qmail-ldap.h 2007-04-05 06:19:17.000000000 -0300
> +++ /var/src/qmail-1.03.ORI/qmail-ldap.h 2007-03-07 15:46:32.000000000
> -0300
> @@ -93,11 +93,11 @@
> ldap variables used in qmail-lspawn and auth_*
> *********************************************************************/
> #define LDAP_MAIL "mail"
> -#define LDAP_MAILALTERNATE "mailAlternateAddress"
> +#define LDAP_MAILALTERNATE "otherMailbox"
> #define LDAP_QMAILUID "qmailUID"
> #define LDAP_QMAILGID "qmailGID"
> -#define LDAP_MAILSTORE "mailMessageStore"
> -#define LDAP_HOMEDIR "homeDirectory"
> +#define LDAP_MAILSTORE "sAMAccountName"
> +#define LDAP_HOMEDIR "NOhomeDirectory"
> #define LDAP_QUOTA "mailQuota"
> #define LDAP_QUOTA_SIZE "mailQuotaSize"
> #define LDAP_QUOTA_COUNT "mailQuotaCount"
> @@ -108,10 +108,10 @@
> #define LDAP_MODE "deliveryMode"
> #define LDAP_REPLYTEXT "mailReplyText"
> #define LDAP_DOTMODE "qmailDotMode"
> -#define LDAP_UID "uid"
> -#define LDAP_PASSWD "userPassword"
> +#define LDAP_UID "mail"
> +#define LDAP_PASSWD "msSFU30Password"
> #define LDAP_OBJECTCLASS "objectClass"
> -#define LDAP_ISACTIVE "accountStatus"
> +#define LDAP_ISACTIVE "userAccountControl"
> #define LDAP_PURGE "qmailAccountPurge"
>
> #define DOTMODE_LDAPONLY "ldaponly"
> @@ -132,10 +132,11 @@
> #define MODE_PROG "program"
> #define MODE_NOREPLY "noreply"
>
> -#define ISACTIVE_BOUNCE "disabled"
> +#define ISACTIVE_BOUNCE "514"
> #define ISACTIVE_DELETE "deleted"
> #define ISACTIVE_NOACCESS "noaccess"
> -#define ISACTIVE_ACTIVE "active"
> +#define ISACTIVE_ACTIVE "512"
> +#define ISACTIVE_ACTIVE_AD "66048"
>
> /*********************************************************************
> ldap variables used in qmail-group
> diff -uNr qmail-1.03.Ori/qmail-ldaplookup.c
> /var/src/qmail-1.03.ORI/qmail-ldaplookup.c
> --- qmail-1.03.Ori/qmail-ldaplookup.c 2007-04-05 06:19:17.000000000 -0300
> +++ /var/src/qmail-1.03.ORI/qmail-ldaplookup.c 2007-03-07
> 15:46:33.000000000 -0300
> @@ -321,16 +321,16 @@
> if (r != OK) fail(q, "qldap_get_status", r);
> switch (status) {
> case STATUS_BOUNCE:
> - output(subfdout, "%s: %s\n",
> - LDAP_ISACTIVE, ISACTIVE_BOUNCE);
> + output(subfdout, "%s: %s %s\n",
> + LDAP_ISACTIVE, ISACTIVE_BOUNCE, "=> disabled");
> break;
> case STATUS_NOACCESS:
> output(subfdout, "%s: %s\n",
> LDAP_ISACTIVE, ISACTIVE_NOACCESS);
> break;
> case STATUS_OK:
> - output(subfdout, "%s: %s\n",
> - LDAP_ISACTIVE, ISACTIVE_ACTIVE);
> + output(subfdout, "%s: %s %s\n",
> + LDAP_ISACTIVE, ISACTIVE_ACTIVE, "=>active");
> break;
> case STATUS_UNDEF:
> output(subfdout, "%s: %s\n", LDAP_ISACTIVE,
--
:wq! Mário Gamito
|