Hallo All,
Don’t know if this is strictly qmail related, but hopefully I will get a few
pointers.
I have a standard LWQ install, with vpopmail. I have three virtual domains, all
with FQDN.
I can send and receive fine to all three from outside our LAN. Problem arises
sending from inside, specifically from an exchange server in the same LAN (Both
are in the 10.2.32.xx range).
The first domain I set up was , let's say mail.first.com. With this there are
no problems.
If I try to send from the exchange server to any of the domains added later,
mail never arrives.
Let's say the second domain I added was mail.second.com.
H:\>telnet mail.second.com 25
Connecting To mail.second.com...Could not open connection to the host, on port
25: Connect failed
H:\>
Both domains resolve to the same ip address inside the LAN.
It seems as if qmail, or tcpserver, is listening on port 25 but only on one
domain - is this possible?
Kind Regards,
Stef
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.441 / Virus Database: 268.18.3/697 - Release Date: 2/22/2007 11:55
AM
|