Hi,
There are many things about that. I thing that you could try to locate
port-socket based map from vendor's management software. Then, to create
supervisor VLAN on the core switch. Both this VLAN must be responsible
for central management of the network and members of vlans IPs must be
routed to all vlan network. So you will able be surf on other VLANS.
regards
-ozan
On Sun, 2007-03-18 at 01:46 +0000, Jon R. Kibler wrote:
> Hi,
>
> A network recon question: When pen testing an environment that deploys
> multi-layer switching, how can one reliably map the network and the relative
> location of all of the switches?
>
> Add to this VLANS... How can you map VLANs that are on the network,
> especially if your access is but on one VLAN, and that VLAN is different than
> the switch management VLAN?
>
> Thoughts, tools, tricks, white papers, etc. appreciated.
>
> THANKS!
> Jon Kibler
signature.asc
Description: This is a digitally signed message part
|